Red Color 2100mm x 4100mm CNC Plasma Tables Cutting Machine with HPR 260 XD
Accurl CPL Series Plasma Cutting Machines has a double side gear drive and it’s designed with strong steel construction for positioning capability at high speeds. You will have a precise cutting ability at X-Y axis with linear guide ways and 30m/min speed. It has ability to maintain constant at the same height and the quality, with the Arc-THC control sensor.
1. CNC plasma cutting machine adopts light-weight structural design, the structure has good rigidity, light weight and small motion inertia.
2.Gantry-type structure. Y axis adopts synchronous double-motor and driver, and X,Y,Z axises adopt linear guideways, stable transmission and high operational precision.
3.Mainly cut Threedimensional LED advertising word, metal plates with groove characters and baseboards, and cutting accuracy lives up to excellent index
4.Small cutting holes, tidiness and no-residue phenomenon, avoids shaping process at second time.
5. Fast cutting speed, high precision and low cost.CNC system with high configuration, automatic arc strike and stable performance, with above 99% arc strike success rate.
CNC Plasma Cutting Machine Features
1. The beam uses light structural design,with good rigidity structure, light deadweight and small movement inertia.
2. The gantry structure, Y axis used dual-motor dual-driven system,X,Y,Z axis all use dual-straight rail that make the machine driving smoothly with high-precision.
3. Aiming at cutting three dimension LED character, trough metal panels and floor cutting, the accuracy can reach good indicators. Equipped with other advertise equipment (blister machine, engraving machine), forming the advertising word processing pipeline. Completely solve the traditional manual processing methods. Improve the efficiency of several times.
4. Cutting mouth is small, tidy,and avoid a second dressing processing.
5. It can apply to iron sheet, the aluminium sheet, the galvanized sheet, hundred steel plates , metal plates and so on.
6. High cutting speed, high precision, and low cost
7. The numerical control system disposes high, the automatic striking arc, the performance is stable.
8. Support Wentai, Astronautics Haire, ARTCAM softwares, Type3 produce standard G code way document,also can change software to read AUTOCAD softwares produce DXF form documents. The control system uses the U-disk exchange processing document, easy to operate.
1. Make up of gas decompression valve and pressure gauge.Clear to check the whole machine pressure.
2. Adopt U71 heavy-duty rail by fine machining.
3. According to user’s requirement,assemble CNC flame single torch,power-spray scribe torch,stamping unit,plasma mechanical torch or linear triple cutting torch,and also fit auto igniter and auto height controller.
4. To ensure the beam won’t deform,it is designed in welded square structure,tempered to eliminate mechanical stress,and then processed by precision machinery.It has high mechanical strength and good rigidity.High-precision and fine-grinded guide rail,gear wheel and gear rack in high steel quality are assembled on top of the beam.Therefore,the accuracy of latcral movement can be guaranteed.The transverse track is bolted on the beam for the convenience of replacement and adjustment.
5. Used in the tracheal cable transmission of numerical control cutting torch,it can work continuously without generating mechanical fatigue.
6. To achieve synchronous motion of two supporting plate by steel strip.
7. The primary master drive is equipped with horizontal oriented wheel to keep stable guidance in operation.There are scraping crumbs on both sides of the driving shelf.They can clear the guide rail.
1. Technical solution.
2. Online video authentication machine work.
3. Cutting samples provided by DHL
4. Supplier will provide detail manual for software, hardware
and trouble shooting, also supplier should give necessary
guidance online if Buyer need. If it’s necessary, Buyer
should send regular his technical staff to Supplier for
Packing & Delivery
1. Our wooden case is after fumigation treatment.Needn’t timber inspection,saving shipping time.
2. All the spare parts of the machine were covered by soms softmaterials,mainly using pearl wool.
3. The outmost is wooben case with fixed formwork.
4. The botton of the wooden case has firm iron jack,covenient to hading and transport.
|Type||ACCURL CPL- 2040|
|Product Name||CNC Plasma Tables|
|Table Width||2100 mm|
|Table Lenght||4100 mm|
|Height Under Torch||150 mm|
|Machine Width||2850 min-1|
|Machine Lenght||5420 mm|
|Machine Height||1710 mm|
|Table Height||800 mm|
|X Axis Stroke||2050 mm|
|Y Axis Stroke||4050 mm|
|Max. Positioning Speed (X-Y)||30 m/min|
Total Power Consumption
(without Plasma System)