How to improve the cutting efficiency of the laser cutting machine?
August 17, 2021
Fiber laser cutting machine has the characteristics of high efficiency, high precision and low pollution. Compared with traditional cutting machines, laser cutting machines can cut metal and other materials more accurately and quickly. So how to maintain cutting efficiency? Today Bond Laser follows Let me share a few points.
1. Planning of cutting graphics route
When performing laser cutting, you must first look at the drawings, conceive the cutting route, plan the best cutting route, and avoid repeated cutting and line repetition.
2. Laser cutting machine parameters
The setting of laser cutting machine parameters is one of the important factors that affect the cutting speed. If the parameters are not adjusted well, the cutting speed will be affected. If you want the machine to exert the best kinetic energy, you need to change different gases according to different materials and adjust the corresponding parameters.
3. Working environment
If the working environment temperature of the fiber laser cutting machine is higher than 30 degrees, or lower than 18 degrees, and there is a lot of dust and the environment is humid, it will easily lead to an increase in the failure rate and even serious damage to the machine. A good factory environment can Effectively improve the cutting efficiency of the equipment.
4. on-time maintenance
Fiber laser cutting machine needs to be debugged and maintained after using for a period of time. Because the laser cutting machine has many accessories and many vulnerable parts, timely replacement and maintenance will greatly improve the cutting efficiency and effectively reduce the failure rate of the equipment.