Plasma in underwater cutting can eliminate noise, dust, harmful gas and arc pollution, effectively improve the environment of the workplace.The use of fine plasma cutting has made the cutting quality close to the laser cutting level. At present, with the maturity of high-power plasma cutting technology, the cutting thickness has exceeded 15mm, which widens the range of CNC plasma cutting machine.
1. Wide cutting field, able to cut all metal plates;
2. Fast cutting speed, high efficiency, cutting speed up to 10m/min above;
3. Higher cutting precision than flame cutting, underwater cutting without deformation.
Plasma series cnc cutting machine is mainly applied to non-insulating material cutting According to material thickness.power source of different current are correspondent choices to best fit high precision request.
||1530 120A plasma cnc cutting machine (high configuration)
|X,Y working area
|Z working area
||Very thick steel structure
||380V three phase 60hz
|Maximum cutting speed
|Torch Height control mode
||Max 25mm carbon steel
|Plasma power supply
|Plasma Air Pressure
||-10°C-60°C. Relative Humidity, 0-95%.
|LCD Display Dimension
1.Steel structure lathe bed is capable of loading heavy metal sheet of large size.
2.Indine design under table surface makes finished parts and scrap slide down to both side along, convenient and safe for operator.
3.DSP hand-held control system dedicated for plasma machine, supports file reading from U disk or downloading from computer.providing high independence and great convenience during operation.
4.Racks and gears as transmission raise moving speed so that large area cutting can be done in short time.
Ship Building, Construction Equipment, Transport Equipment, Aerospace Industry, Bridge Building, military industrial, wind power, Structural Steel, Boiler containers, Agriculture Machinery, Chassis electrical cabinets, Elevator manufacturers, Textile Machinery, Environmental protection equipment,ect. plasma cutting machine plasma cutting machine
1. clean and oil the machine
2. Put all accessories onto the table or under the machine
3. Pack the machine with protective films and fix machine
4. Pack the machine by plywood box
5. Container transport to the port.