High Speed Metal Cut 1.3x2.5M Cnc Plasma Cutting Machine Steel Substrate

Product Description

High Speed Steel Metal Cut 1.3 X 2.5 M Cnc Plasma Cutting Machine

►Machine overview

Plasma is a gas that is heated to a very high temperature and is highly ionized. It transfers the arc power to the workpiece. The high heat melts the workpiece and is blown off, forming the working state of plasma arc cutting. After the compressed air enters the cutting torch, it is distributed by the gas chamber to form plasma gas and auxiliary gas. The plasma gas arc serves to melt the metal, while the auxiliary gas cools the various parts of the torch and blows off the molten metal.

►Machine Data

►Product Advantage

①We do this line many years, have rich experience and professional knowledge, will let you get the most suitable machine with the right configuration. This ability can let you avoid many mistake and avoid some trouble. Other factory usually lack this experience, and bring some trouble for the real customer.

②If use the plasma cutting machine to cut the the thick meal, have to use the arc height adjust system, while our height adjust system use the high sensor, one minute can send out 12,000 signal per minute, while other height adjust system usually send out 10000 signal per minute, so our cutting quality more better than other factory and cutting speed a litter faster than the same power plasma source.

③we equipped the two fan for take the cutting smoke out from the room, front fan will blow to back, the back fan will exhaust the smoke out from the machine and out from the room. This way, will efficiency to let the workshop in the good environment. While other factory does not have this fan or only have one.

④ All our machines have to be checked three times, then allow to send out ,and finally will put one 8GB flash disk into the package, when the customer received the machine, can easy check the video from the 8GB flash disk ,then do the easy operation, in the video nearly like hand by hand do the teaching job, so can let the customer in the shot time to let the machine create the profit. While we also have the video platform, after you purchase the machine, we will give you one password, then you can easy to get the efficiency “after-sell service” from the internet. While other small factory usually, only check one time for the machine, and no 8GB flash disk, and no video platform, then it is hard for you to get the good after-sell service.

►Application

The plasma cutting machine can be used to cut various metal materials such as stainless steel, aluminum, copper, cast iron, carbon steel, etc., not only the cutting speed is fast, the slit is narrow, the cut is flat, the heat affected zone is small, the deformation of the workpiece is low, the operation is simple, and it has significant The energy-saving effect. Plasma cutting machine is suitable for the manufacture, installation and maintenance of various machinery and metal structures, as well as cutting, opening, digging, and beveling of middle and thin plates.